Driveway Gates in Federal Way, WA
Federal Way is a young city as Puget Sound cities go, incorporated in 1990 and built out mostly in the decades since. Most of that growth means straightforward suburban lots and standard driveways, but not everywhere. Marine Hills and Twin Lakes sit up on the bluff overlooking Puget Sound, with hilly streets, sloped driveways, and view lots that don’t match a stock gate kit, while Dash Point and Dumas Bay closer to the water bring the same grade challenges from a different angle.
Federal Way’s other identity is corporate and commercial. The former Weyerhaeuser world headquarters campus, now redeveloped as Woodbridge Corporate Park, sits alongside I-5, and the retail centers and apartment complexes that went up during the city’s rapid 1990s growth still define a lot of Federal Way’s built environment. That mix means real demand for security-focused commercial gates alongside residential driveway gates, not just one or the other.
The City of Federal Way generally allows fences and gates up to 6 feet in required yards without a permit, with a combined height limit for any fence built near a rockery or retaining wall, relevant on Marine Hills’ hillside lots. Electrified security fencing is permitted in specific commercial and industrial situations, though razor wire is prohibited citywide. Add Federal Way’s roughly 41 inches of rain a year, and every gate Holland Iron builds is fabricated and finished for the code as well as the weather.
Free Estimates: Call (253) 564-5671
New Driveway Gate Design & Fabrication
Starting from scratch gives you the most control over how the entrance looks and functions. Holland Iron measures your driveway on-site, whether that’s a standard subdivision lot or a sloped Marine Hills driveway with real elevation change, works with you on a design, and fabricates the gate in-house from steel, wrought iron, or aluminum. Holland Iron specializes in custom iron and steel gate fabrication designed to enhance security, functionality, and the appearance of your property. Our skilled craftsmen create durable, high-quality gates tailored for residential, commercial, and architectural applications, built to your exact opening instead of adjusted to fit someone else’s frame.
Driveway Gate Installation
Installation is where a gate either works for years or starts sagging within a season. Posts need to be set deep and plumb enough to handle Federal Way’s wet winters and, on Marine Hills or Twin Lakes lots, real grade change from the street to the garage, hardware has to be rated for the panel’s weight, and an automated gate needs wiring and an opener installed to code. Holland Iron handles the full install, from setting posts to final hardware adjustment, so the gate swings or slides correctly from day one.
Driveway Gate Repair
A gate that’s sagging, sticking, rusting at the hinges, or no longer latching is usually a hardware or post problem, not a reason to replace the whole thing. Federal Way’s rain and freeze-thaw cycles work hinges and latches loose over time, and a commercial gate that opens dozens of times a day at an apartment complex or business wears faster than a residential one. Holland Iron repairs hinges, welds cracked or rusted sections, replaces worn rollers and latches, and resets shifted posts, getting an existing gate back to solid working order without the cost of starting over.
Custom Driveway Gates
Custom work is where Holland Iron spends most of its time. Some clients on Marine Hills or Twin Lakes want a gate that fits a view property, built to handle a sloped entrance without looking like an afterthought. Businesses along the I-5 corridor often want something more security-focused: a solid panel design, controlled access, and a look that fits a commercial or multifamily property. Because everything is fabricated and welded in-house, there’s no catalog involved. The design gets built around what you actually want and what fits the opening.
Automated Driveway Gates
An automated gate adds convenience and an extra layer of security, letting you open the driveway from a remote, keypad, or phone app without getting out of the car. It’s a common upgrade for hillside homes on Marine Hills where walking out to a manual gate isn’t practical, and for commercial and multifamily properties that want controlled access for residents, tenants, or employees. Holland Iron handles the engineering and installation with the city’s permit process in mind from the start, including WABO-certified welding on structural components, so the automation goes in correctly the first time.
How It Works
Free On-site Estimate
Holland Iron measures your driveway, discusses design and material options, and flags any permit or code considerations for your property.
Fabrication
Your gate is built in-house, welded and finished for Federal Way’s rain and year-round wear.
Installation
Posts are set, the gate is hung or mounted, and hardware (and automation, if applicable) is tested before the job is called done.
Why Federal Way Homeowners & Businesses Choose Holland Iron
Holland Iron’s welders are WABO certified, which matters most on structural and automated gate work, where an inspector actually checks the welds. Gates are fabricated in-house rather than resold from a manufacturer’s stock line, and since measurements are taken on-site, gates fit driveways whether they’re a standard subdivision lot or a sloped Marine Hills entrance. Mobile welding capability also means repairs and adjustments can happen at your property instead of hauling a heavy iron gate to a shop and back.
Call (253) 564-5671 for a Free Estimate
Driveway Gates Throughout Federal Way
Holland Iron designs, fabricates, and installs driveway gates throughout Federal Way, including Marine Hills, Twin Lakes, Dash Point, Dumas Bay, Redondo, Steel Lake, and the West Campus area. The same crew also serves Tacoma, Gig Harbor, Puyallup, Olympia, and the greater Puget Sound area.
Frequently Asked Questions
Do I need a permit for a driveway gate in Federal Way?
It depends on the gate. A manual gate at or under the city’s standard 6-foot height limit for required yards generally doesn’t need a separate permit. An automated gate with a motor and wiring is different and typically requires its own permit review. Commercial properties considering electrified security fencing have additional restrictions on where and how it can be used. Holland Iron can walk you through which of these apply during the estimate.
How much does a custom driveway gate cost in Federal Way?
Cost depends on size, material, design complexity, and whether the gate is automated. A straightforward manual steel gate costs less than a large ornamental iron gate with an opener, motor, and keypad. Holland Iron provides a free, itemized estimate after seeing the driveway and discussing what you want, so you know the number before any work starts.
How long does a driveway gate installation take in Federal Way?
Most residential gates take one to two days to install once the design is finalized and materials are on hand. Custom fabrication adds lead time upfront, since the gate is built to your exact opening rather than pulled off a shelf. Automated gates take a bit longer due to wiring and opener setup.
Can you build a gate for a sloped driveway on Marine Hills or Twin Lakes?
Yes. Holland Iron measures the actual grade change on-site and designs the gate, posts, and hardware to handle it, rather than adapting a flat-lot design after the fact. This is common work on Federal Way’s hillside properties.
Do you install security gates for commercial or multifamily properties?
Yes. Holland Iron builds gates for businesses, apartment complexes, and property managers along the I-5 corridor who need controlled access, not just a decorative entrance. These projects are scoped around the property’s security needs and daily traffic.
Do you repair gates you didn't originally install?
Yes. Sagging panels, broken welds, worn rollers, and misaligned posts are common repair calls no matter who installed the gate originally.
Expert Driveway Gates Installation & Repair in Federal Way
Holland Iron provides custom driveway gate design, fabrication, installation, automation, and repair services throughout Federal Way, WA, building durable gates tailored to each property’s opening, style, grade, and security needs. From steel and wrought iron gates to custom automated entry systems, their skilled craftsmen handle every stage in-house for a precise fit and reliable performance. Whether you need a new driveway gate, repairs to a sagging or damaged gate, or a custom automated solution for a residential, commercial, or multifamily property, Holland Iron delivers professional workmanship built to withstand Federal Way’s wet weather and everyday use.
Call Us for a Free Estimate